Filter
Top Products
®
Page 10 www.midlandradio.com
GXT80
0/808/850 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your GXT800/808/850 Series can scan all 22 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 22 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the button.
CALL
ALER
T
Your GXT800/808/850 Series can transmit a call alert for a fixed length
of time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
The GXT800/808 has 5 call alert selections while the GXT850 has 10
call alerts including 5 “animal sound” call alerts - Turkey, Duck, Crow,
Cougar, Wolf.
Model GXT800/808/850 Series
MENU
Channel
eVOX
1~22
Privacy
Roger Beep
On/Off
Power
H/M/L
Call Tone
1~5
Vibrate
On/Off
WX Channel
1~10
Press &
hold Menu
button
Silent Operation
On/Off
oF~9
Off
CTCSS
DCS
1~38
1~104
WX Alert
On/Off
Group Mode On
Off
ID Setting
Ring Tone
0~5
Group Code
0~142
Caller ID
4 digit code (0~9),
Press MON to
choose each digit
1~10
1~10 for GXT850
/