Filter
Top Products
Model GXT760/795 Series
Page 10
www.midlandradio.com
When the Battery Meter drops to 1 bar , the TX Power will
automatically switch from Hi(H) or Med(M) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14 and 34~37). They are set to Low power per
FCC regulations.
VOX (Hands-free Transmission)
Your radio has 5 VOX level settings: (oF/1~5).
To set VOX, press the MENU button until the display shows “VOX”
blinking while on the right of the CHANNEL NUMBER display,
an “oF” icon appears. Select “1~5” by pressing the buttons and
push the PTT key, or press MENU button again to move to the next
feature setting.
VOX will be more sensitive on the “1” setting than on the “5” setting.
To turn VOX off, press the MENU button until the display shows
“VOX” blinking while on the right of the CHANNEL NUMBER display,
a “1~5” icon appears. Select “oF” by pressing the buttons and
push the PTT key, or press MENU button again to move to the next
feature setting.
SILENT OPERATION
Your GXT760/795 Series has a SILENT OPERATION mode. In this
mode, all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button
until the display shows an “bP” icon while on the right of the “bP”
display, an “on” icon appears. Select “of” by pressing the buttons
and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button
until the display shows an “bP” icon while on the right of the “bP”
display, an “oF” icon appears. Select “on” by pressing the
buttons and push the PTT key or MENU button.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
/
/
/
!
/
/