Filter
Top Products
®
Page 11 www.midlandradio.com
SETTING PRIVACY CODES
Your GXT300/325/310/400/450 Series has 38 Privacy codes
available. The selected Privacy Code may be different for each
channel. To select a Privacy Code for the current channel press the
MENU button twice, and then the buttons to select one of the
38 Privacy Codes. To confirm the selection, press the PTT button or
press MENU button again to move to the next feature setting.
Note : Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT300/325/310/400/450
Series radios, all radios in your group must be set to the same
channel and Privacy Code selections.
TRANSMIT (TX) POWER LEVEL SELECTION :
Your GXT300/325 Series has 2 transmit power levels and the
GXT310/400/450 Series has 3 power level settings. To select the
power level on channels 1~7 and 15~22, press the MENU button three
times, a “Pr” icon will appear blinking on the display. Then press the
buttons to select TRANSMIT POWER LEVEL icon (H: Hi/
M: Mid/L: Lo). To confirm, press the PTT button or press MENU
button again to move to the next feature setting. When the PTT
button is pressed during Low Battery Level condition, the TX
Power will automatically switch from Hi(H) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
eVOX (Hands-free Transmission)
Your GXT300/325/310/400/450 Series has 2 eVOX level settings:
(oF/1/2).
To set eVOX, press the MENU button four times. The display shows
“VOX” blinking while on the right of the CHANNEL NUMBER display,
an “oF” icon appears. Select “1” or “2” by pressing the buttons
and push the PTT key, or press MENU button again to move to the
next feature setting.
eVOX will be more sensitive on the “2” setting than on the “1” setting.
To turn eVOX off, press the MENU button four times. The display
shows “VOX” blinking while on the right of the CHANNEL NUMBER
display, a “1” or “2” icon appears. Select “oF” by pressing the
buttons and push the PTT key, or press MENU button again to
move to the next feature setting.
/
/
Model GXT300/325/310/400/450 Series
/
!
!
/