Filter
Top Products
Model GXT2000/2050 Series
Page 10
www.midlandusa.com
SETTING PRIVACY CODES
Your GXT2000/2050 Series has 142 Privacy Codes available which
can only be used on channels 1~22. The selected Privacy Code may
be different for each channel. To select a Privacy Code for the
current channel press the MENU button twice, and then press the
buttons to select between “Off/CTCSS/DCS.” Press the MENU
button again and the buttons to select one of the 38 CTCSS
Codes or one of the 104 DCS Codes.
The Privacy Code icon on the display will indicate whether you set
your Privacy Code in CTCSS or DCS mode. To confirm the selection,
press the PTT button or press the MENU button again to move to the
next feature setting.
Note : If you select a CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT2000/2050
Series radios, all radios in your group must be set to the
same channel and Privacy Code selections. The Privacy
Code can only be set in channels 1~22.
TRANSMIT (TX) POWER LEVEL SELECTION
Your GXT2000/2050 Series has 3 power level settings. To select the
power level on channels 1~7, 15~33 and 38~50, press the MENU
button until a “Pr” icon appears blinking on the display. Then press the
buttons to select TRANSMIT POWER LEVEL icon (H: Hi/
M: Med/L: Lo). To confirm, press the PTT button or press the MENU
button again to move to the next feature setting. When the Battery
Meter drops to 1 bar , the TX Power will automatically switch
from Hi(H) or Med(M) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14 and 34~37). They are set to Low power per
FCC regulations.
/
/
!
!
/