Midland Radio 895 Two-Way Radio User Manual


 
Model GXT860/895 Series
Page 11
www.midlandusa.com
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
on” icon appears. Select “oF” by pressing the buttons and push
the PTT key, or press the MENU button to move to the next feature
setting.
CALL ALERT SELECTION
Your GXT860 Series has 10 selectable CALL ALERTS (15 for
GXT895). To select, press the MENU button until a “CA” icon appears
and to the right of the “CA” icon the current CALL ALERT setting is
displayed. Then press the buttons to make the CALL ALERT
selections, and the radio will emit a corresponding tone for each
selection. To confirm, press the PTT button or press the MENU
button to move to the next feature setting.
VIBRATE ALERT
To turn the VIBRATE ALERT on, press the MENU button until the
display shows the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “oF” icon appears. Select on by
pressing the buttons and push the PTT button, or press the
MENU button. The VIBRATE ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button until the
display shows the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “on” icon appears. Select “oF” by
pressing the buttons and push the PTT button, or press the
MENU button. The VIBRATE ALERT icon will go off.
NOAA WEATHER RADIO/SCAN
Your GXT860/895 Series has a NOAA WEATHER RADIO function
to enable the user to receive weather reports from designated NOAA
stations.
Your radio also has a NOAA WEATHER SCAN function, to enable
the user to scan all 10 channels of the NOAA WEATHER RADIO.
To turn the NOAA WEATHER SCAN on, press and hold the MENU
button for 5 seconds while in GMRS mode. The radio will go to WX
Band mode and start scanning all 10 channels and stop on any active
channel. When the channel becomes inactive for 10 seconds the
radio will resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN.
/
/
/
/