Filter
Top Products
Desk or Tabletop Installation
1. Plug the AC adapter cord into the
DC IN 9V
input jack on
the base.
2. Wrap the AC adapter cord inside the molded strain-relief.
3. Plug one end of the telephone cord into the
TEL LINE
jack on
the base.
4. Place the telephone cord into the right molded channel
cord holder.
5. Plug the other end of the telephone cord into the telephone
wall jack. (Remember, the handset must be fully charged
before you can use it.)
6. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
7. Raise the antenna on
the base.
Wall Installation
▼Setting the Handset Retainer for Wall Mounting
1. Remove the handset
retainer on the base by
sliding it upward.
2. Flip the retainer over so
the tab is facing up.
3. Slide the retainer back
onto the base.
▼Mounting on a Standard Wall Plate
The phone is designed to be mounted on a standard AT&T or GTE
wall plate.
1. Plug the AC adapter into the
DC IN 9V
input jack on the base.
2. Place the AC adapter cord inside the left molded channel
cord holder.
3. Plug a telephone cord into the
TEL LINE
jack on
the base.
4. Place the telephone cord into the right molded channel
cord holder and plug the other end of the cord into the wall
jack. (Remember, the phone must be fully charged before
you can use it.)
5. Place the base on the two posts of the wall plate and slide
downward to secure.
6. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
7. Raise the antenna on the base.
6
!
Use only the Memorex AC adapter that came
with the phone.
!
Use only the Memorex AC adapter that came
with the phone.
H:...MPH 6955 Map OM.vp
Mon Jun 28 16:00:15 1999
Color profile: Disabled
Composite Default screen