Lucent Technologies merlin plus communications system Telephone User Manual


  Open as PDF
of 6
 
SYSTEM RESET
DIAL *99198
TURN power off, wait 10 seconds
TURN power on
BASIC ADMINISTRATION
NUMBER OF OUTSIDE LINES
DIAL *4
DIAL one digit for the number of lines (l-8)
TOUCH Administer
DIAL SIGNALS
DIAL
*38
Touch-Tone (F†)
*39
Rotary
TOUCH Administer
LONG DISTANCE DIALING
DIAL
*36
Toll prefix (0 or 1) needed (F)
*37
Area code only needed
TOUCH Administer
TRANSFER RETURN INTERVAL
DIAL *2
DIAL one digit for the number of rings before a
transferred call returns to the attendant (0–9)
(F=4 rings)
TOUCH Administer
HOLD DISCONNECT INTERVAL
DIAL *69
TOUCH line button
Green light on = long (450 msec) interval (F)
Green light off = short (50 msec) interval
TOUCH Administer
GROUP PAGING
DIAL
*71 Group 1 (voice terminals 10-19)(F)
*72 Group 2 (voice terminals 20-29) (F)
TOUCH Auto Intercom button (or dial appropriate
code from dial code chart)
Green light on = telephone assigned
Green light off = telephone removed
(or TOUCH Drop to remove all telephones from a
paging group)
TOUCH Administer
JACK ASSIGNMENT
BUSY BUSTER
Dial *35
TOUCH Auto Intercom button (or dial
Intercom number) of jack (F=jack 19)
Green Iight on = jack assigned
Green light off = jack not assigned
AUTOMATIC SYSTEM ACCESS
DIAL *59
TOUCH Auto Intercom button (or dial
intercom number) of jack (F=Jack 18)
Green light on = jack assigned
Green light off = jack not assigned
TOUCH Administer
CALL REPORT AND SYSTEM FEATURE REPORT
DIAL
*82 Reports (SMDR)
*85 System Feature Report
TOUCH Auto Intercom button (or dial
intercom number) of jack (F=jack 19)
Green light on = jack assigned
Green light off = jack not assigned
TOUCH Administer
LINE ADMINISTRATION
ASSIGN LINES TO A VOICE TERMINAL
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned
Green light off = line not assigned
TOUCH Administer
BUTTON - FREE LINE OPERATION
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned
Green light off = line not assigned
(or DIAL *34 to assign all Iines)
DIAL *31 Incoming calls ring
*32 Incoming calls don’t ring
TOUCH Administer
†F=Factory setting.
 previous next