Filter
Top Products
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
503-801-165
Quick Reference
Issue 2 February 1999 7
Preselecting a Line or Button
After Line Preselection is enabled, proceed as follows:
1
If the display is blank, press
"
.
2
If necessary, press
"
to move the Selection rectangle.
3
Press
'
corresponding to the line or button you want.
4
Press
O
to access the line or button.
Accessing Certain Voice Mail Systems
with a DEFINITY System
Note:
This section only applies to the MDW 9031 Pocket Phone.
After dialing into some voice mail systems (for example, Octel 200/250,
300/350), the MDW 9031 Pocket Phone may not provide touch tones in
order to access the voice mail system prompts.
If you experience this problem after dialing into your voice mail system,
press the
Feat/P
button twice. After pressing the
Feat/P
button twice, your
Pocket Phone will generate touch tones and you will be able to navigate
within your voice mail system. When you end your call to your voice mail
system, or press any non-dialpad button on your Pocket Phone (that is, Conf,
Trans, Hold, Redial, Mute), your MDW 9031 will stop generating touch
tones behind the voice mail system. You will need to re-enter
Feat/P
whenever you dial into these voice mail systems or after you have
pressed a non-dialpad button.
qrtitle.book Page 7 Friday, December 18, 1998 9:52 AM