Filter
Top Products
9
To end a speakerphone call
1 Press again to hang up.
NOTE: With a DEFINITY G3V3 or later, if the person
you are talking with hangs up first, the call will be
disconnected. If you press , you will get dial
tone.
To see number stored on an AD button
1 Press the softkey below View (for display users)
or Press .
2 Press selected AD button.
To see the last number you dialed
1 Press the softkey below View (for display users)
or Press .
2 Press the softkey below Last
or, if Last is not available on your display, press
or Dial the Last Number Dialed access code
_______.
To test the lights and display (if applicable) on
your voice terminal)
1 Press and hold down .
• Green Test light goes on.
• Button lights go on in two separate groups,
and, if your terminal has a display, all display
segments fill in.
2 To end test, release .
To see time and date
1 Press softkey below TmDay (for display users)
or Press .
STORED NUMBER (display feature)
TEST
TIME/DATE (display feature)
Speaker
Speaker
Stored
Stored
LastDialed
Test
Test
Time/Date
8410.qref.def3 Page 9 Monday, August 17, 1998 9:09 AM