Filter
Top Products
2-2
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Linksys 900 Series IP Phones
Caring for Your Hardware
The Linksys 900 Series IP phones are electronic devices that should not be exposed to excessive heat,
sun, cold or water. To clean the equipment, use a slightly moistened paper or cloth towel. Do not spray
or pour cleaning solution directly onto the hardware unit.
SPA901
The SPA901 provides an entry-level IP phone that can be wall mounted (see Figure 2-1). The following
are the hardware features provided by the SPA901:
• Voice Mail Message Waiting Indicator Light
• Redial Button
• Dedicated Flash Button
• Volume Control Button Cycles Through Volume Levels. Controls Ringer and Handset Volume.
• Standard 12-Button Dialing Pad
• High Quality Handset and Cradle
• Ethernet LAN – 10BaseT RJ-45
• 5-volt DC Universal (100-240 Volt) Switching Power Adaptor
Figure 2-1 SPA901
The following tables describe the status indicators and controls on the front of the device and the ports
on the back panel of the device.