Linksys SPA901 IP Phone User Manual


 
SPA901
Model No.
PRODUCT DATA
One Service Provider Line
Two Call Appearances Accessed Via Flash Key or Hook-Flash
Shared Line Appearance **
•Line Status Indicator
Call Hold
Music on Hold **
Call Waiting
Outbound Caller ID Blocking
Call Transfer - Attended and Blind
Three Way Conferencing with Local Mixing
Multi-Party Call Conferencing via External Conference Bridge **
Call Pick Up - Selective and Group **
Call Park and UnPark **
Call Back on Busy
Call Blocking - Anonymous and Selective
Call Forwarding - Unconditional, No Answer, On Busy
Call Return - Redial Last Caller
Hot Line and Warm Line Automatic Calling
Call Logs (60 entries each): Made, Answered, and Missed Calls. Accessed via HTTP Server.
Redial Last Called Number
Do Not Disturb (callers hear line busy tone)
Block Anonymous Incoming Calls
URI (IP) Dialing Support (Vanity Numbers)
Built-in Web Server for Administration and Configuration, with User and Admin Access Levels
Built-in Interactive Voice Response system to check status and change configuration
Date and Time with Intelligent Daylight Savings Support
Call Start Time Stored in Call Logs
Distinctive Ringing
Ten User Downloadable Ring Tones - Ring Tone Generator Free from www.linksys.com
Speed Dial (8 entries)
Group Paging (outbound only) **
Intercom (outbound only) **
Set Preferred CODEC, Per Call, All Calls
Configurable Dial/Numbering Plan Support
Ringer and Handset Volume Controls
Handset Input Gain Adjustment
DNS SRV and Multiple A Records for Proxy Lookup and Proxy Redundancy
Syslog, Debug, Report Generation, and Event Logging
Secure Call Encrypted Voice Communication Support
NAT Traversal
Automated Provisioning, Multiple Methods. Up to 256 Bit Encryption: (HTTP, HTTPS, TFTP)
Support Linksys Voice System Automatic Configuration
Optionally Require Admin Password to Reset Unit to factory defaults
** Feature requires support by call server
Telephony
Features
Hardware
Voice Mail Message Waiting Indicator Light
Redial Button
Dedicated Flash Button
Volume Control Button Cycles Through Volume Levels. Controls Ringer and Handset Volume.
Standard 12-Button Dialing Pad
High Quality Handset and Cradle
Ethernet LAN – 10BaseT RJ-45
5 volt DC Universal (100-240 Volt) Switching Power Adaptor