Linear DMC-10RS Intercom System User Manual


 
1
Introduction
Linear’s M&S Systems brand Model DMC-10 Structured Wiring Intercom
System offers several advanced features never before available in an
intercom system. Its distributed hub design provides easy installation and
structured wiring mounting compatibility necessary for modern residential
and light commercial applications.
The room, door, and patio stations showcase a new, contemporary design,
crafted to blend smoothly into the installation’s decor. Station faceplates
are available in a variety of colors to further customize each installation.
Room station keypads are illuminated with soft blue indicators while the
intercom is in use. The door and patio station keys are illuminated with
white lighting for easy nighttime operation.
The heart of the system is the Model DMC-10H Intercom Hub. The intercom
hub grid mounts in a structured wiring enclosure. Up to eight room, door,
and patio stations in any combination can be connected to the system hub
using up to 500 feet of standard Cat-5 cable for each station. For larger
installations, a second system hub can be added for expansion, providing a
total system capacity of up to 16 stations. The Model DMC-10AWP Audio
Input Wall Plate can be added to the system to connect an external audio
source for distribution throughout the intercom system.
The room, patio, and door stations mount inside standard 2-gang junction
boxes and are easy to install and wire. Each station and the system hub
contains color-coded Type 110 punch-down terminal blocks for fast and
reliable connection to Cat-5 cable. A 12-volt switching power supply is
included with each intercom hub.
LISTEN
DOOR
TALK
MUTE
VOL
MUTE
VOL
TALK
DOOR
LISTEN
DOOR
TALK
MUTE
VOL
LISTEN
DOOR
TALK
MUTE
VOL
SIGNAL
OVERLOAD
SIGNAL
LEVEL ADJ.
MUTE
OUTPUT
LEFT
RIGHT
DMC-10AWP
AUDIO INPUT
DMC-10DS
DOOR STATION
DMC-10PS
PATIO STATION
DMC-10H
INTERCOM HUB
DMC-10RS
ROOM
STATIONS
POWER
SUPPLY
OPENHOUSE
STRUCTURED
WIRING
CABINET
CAT-5
CAT-5
CAT-5
CAT-5
CAT-5
CAT-5
DMC-10AWP
AUDIO INPUT
WALL PLATE
Figure 1. Typical DMC-10 Installation