IB-PH543(168F)-WM-E-051203
CALLER ID FEATURES
Deleting the Data from the Caller ID List
TO DELETE THE CALLER ID MEMORY ONE BY ONE
1. Display the callers ID you want to delete.
2. Press the DELETE button
twice
quickly, the display shows the
next or previous call, and the data is deleted.
TO DELETE ALL THE CALLER ID MEMORIES
1. Make sure that all
NEW
calls have been reviewed (NEW CALL
INDICATOR at the back of the handset does not flash).
2. Press the UP or DOWN button to display any call, make sure
the display does not show
END OF LIST
.
3. Press and hold the DELETE button down for 6 seconds.
Display changes to
NO CALLS
, all Caller ID memories are
deleted.
NOTE: You cannot delete all the Caller ID memories when there
are any new calls remaining (not viewed yet), or when
END
OF LIST
is shown in the display.
Using Message Waiting / Mailbox
12
To use the Message Waiting feature, you must subscribe to this
service if available from your local telephone company.
This phone will only respond to FSK type of message delivery.
1. If the message is sent by the telephone company which is
preceded by a ring, the MESSAGE WAITING symbol
will appear in the display, and the NEW CALL INDICATOR
will flash after 20 seconds.
2. After you retrieve your message(s), the telephone company
will send a clear signal (by a ring) to your phone. The symbol
will turn off until a new message is received. The NEW
CALL INDICATOR will stop flashing. Sometimes the
telephone company will not send a message clear signal to
your phone, then you will have to clear the message waiting
symbol manually by holding the DELETE button, then
pressing the UP button.