Filter
Top Products
You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons
or 10 two-touch speed dial memories.
Storing phone number into memory
For 3 one-touch dialing:
For 10 two-touch dialing:
1. Press the Speakerphone Button (the lamp will light).
2. Press the Store Button.
3. Dial the phone number you want to store. You can store up to 15 digits.
5. Press one of the 3 one-touch
speed dial buttons (M1 to M3).
Press a number from 1 to 0 (where you would
like your number stored).
6. Press the Speakerphone Button.
7. Repeat steps 1 to 6 to store numbers into other memory locations.
MEMORY DIALING
4. Press the Store Button.
In case you want to change a number you stored, simply store a new number, the
old one will be automatically erased.
NOTE 1. If you move your phone to another room or disconnect the phone line,
your stored numbers will remain in the memory for a short time, so
quickly reconnect it to the new jack or you will have to re-program the
memory numbers.
NOTE 2. When storing emergency numbers (like 911) if the operator comes on,
tell her you are programming or testing a phone and you do not have an
emergency. Otherwise, they might dispatch the police to your location.
TO DIAL NUMBER FROM 3 ONE-TOUCH NUMBERS
Get dial tone (by picking up Handset or pressing Speakerphone Button), and
press one of the 3 emergency buttons marked with the symbols M1, M2 or M3.
TO DIAL A NUMBER FROM MEMORY BUTTONS (10 NUMBER LOCATIONS)
1. Press Speakerphone Button or pick up Handset (listen for dial tone.)
2. Press Auto and the numerical button in which the number you want to dial is
stored. The set will dial the number stored in the memory you selected
automatically.
EXAMPLE: Pressing Auto 2 (in TONE or PULSE) will dial the number you
stored in 2.
TO LIST YOUR MEMORY NUMBERS
1. Remove clear plastic cover Memory Index Card.
2. Write numbers on Memory Index Card (in pencil so you can change them
later).
3. Replace Memory Index Card and plastic cover.
8
PH-318120499 MS V.3
E