Filter
Top Products
14
english
JABRA SP700
I want to reset the pairing list on my speakerphone
- The speakerphone registers a list of up to 7 mobile phones. To
remove the list, press and hold the Answer/End button, Volume
up button and FM button at the same time. A beep indicates
the list was removed from the speakerphone memory. The
next time you power on, the speakerphone will go into pairing
mode as the first time you powered your new SP700 on.
Will the Jabra SP700 work with other Bluetooth equipment?
- The Jabra SP700 is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile.
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.
I can not connect speakerphone and radio via FM transmitter
- Make sure the radio is turned on and speakerphone is in FM
mode (FM Status Icon is on).
- If your radio when searching is not able to find the FM fre-
quency set by your speakerphone, the FM frequency must be
tuned in manually on the radio. Please read radio manual to
find out how to manually change frequency on your radio.
- The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speaker-
phone. On some radios you are able to adjust the sensitivity
thus making it possible to find the speakerphone frequency
when searching. If not tune in manually.
- In urban areas it might be difficult to find a clear frequency. It
is therefore advisable to use a frequency in the lower or upper
end of the FM frequency band (e.g. 88.1 or 107,7 MHz) where
you will have the best chance to find a clear frequency.