Filter
Top Products
5
enGlish
JABRA JX20 PURA
Charging your headset from your deskstand:
What you see What this means
LED o No device in deskstand
1st. LED solid Device in deskstand
1st. LED solid, 2nd. LED pulsing
0-25% charged
1+2 LED solid, 3rd. LED pulsing
25-50% charged
1+2+3 LED solid, 4th. LED pulsing
50-75% charged
1+2+3 +4 LED solid, 5th. LED pulsing 75-100% charged
All LED´s solid Fully charged
Check Battery status:
• When you are not in a call, tap either volume button.The LED
will ash in accordance with the AC adapter/USB charger
sequence above.
turninG your headset on and off
• Gently turn the earpiece 90° clockwise to turn on the headset
(see g. 1).
• Gently turn the earpiece 90° anti-clockwise to turn o the
headset (see g. 1).
PairinG it With your Phone
The rst time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode. In this case skip directly to point 2 below.
When pairing with a second device, or if you need to pair
manually, start with point 1 below.
1. Put the headset in pairing mode:
• Turn the headset on.
• Press and hold the answer / end button until the LED on the
back shines continuously.