Filter
Top Products
6
ENgLiSh
JABRA BT3030 BLUETOOTH HEADSET
Please note that the LED indicator light turns o after 1 minute
to save battery. To check if the headset is on, tap the answer/end
button once – the LED indicator light will ash, if the headset is on.
PAiRiNg yoUR hEAdSET WiTh yoUR PhoNE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can easily be
paired with a headset.
1. Put the headset in pairing mode
When you turn on your Jabra BT3030 for the rst time, the headset
will automatically start up in pairing mode – i.e. it is discoverable
for your phone. When the headset is in pairing mode the LED is
constantly lit with a blue light.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT3030
Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your phone
to discover the headset. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from
a typical mobile phone in g. 1).
3. Your phone will nd the Jabra BT3030
Your phone will nd the headset under the name BT3030. Your
phone then asks if you want to pair with the headset. Accept by
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the passkey
or PIN = 0000 (4 zeros). Your phone will conrm when pairing is
complete.
Fig. 1
Connectivity
MobilSurf
Bluetooth
Infrared port
WAP options
Synchronization
Networks
Select Info
Handsfree
Ok
JABRA BT3030
Added. The
handsfree is now
ready for use
Devices found
Select
JABRA BT3030
Ok
Passkey:
JABRA BT3030