[12]
PERMANENT PHONE BOOK
The phone has memory for 99 of your friends, relatives, and associates. You can store entries of
up to 32 digits with an associated name up to 12 characters. There are two ways to access the
entire phone book.
• When a call is not in progress (the phone is in standby status): Turn the dial-shuttle one
click in either direction to the “SAVED #S” screen. Turn it down another click to enter the
“Phone Book.”
• Regardless of whether a call is in progress: Select “Features,” then ”Directory,” then
“Phone Book.”
You can save numbers through the “Directory” menu or directly from the phone’s standby state
(the fastest way). If you’re starting from standby, begin at step 4 below. Use memory locations 1
to 9 for one-touch dialing of your most commonly used phone numbers.
1. Select “Features.”
2. Scroll and select “Directory.”
3. Select “Save.”
4. Enter the phone number that you want to save.
5. Select “Options.”
6. Select “Save.”
7. If you prefer, enter a name to go with the number—up to 12 characters long.
Press the key labeled with the letter you want. Pressing a key repeatedly changes the
letter or number in the flashing cursor position on the screen. When you have the
correct letter or number in position on the screen, wait about two seconds for the
cursor to automatically advance one space. Press to correct any mistakes. Turn
the dial-shuttle to move the cursor forward and backward.
8. Select “Save” to store entered name.
9. Select “Save” at the “Save in location...” prompt to store the entry. Or, if desired,
scroll to select (or enter) a custom storage location and follow the remaining “Save”
prompts.
SAVING NUMBERS TO THE PHONE BOOK