Filter
Top Products
The Direct Connect feature saves
you time and gives you a better
connection. you can use your
Krown 200 without having to
place the telephone handset into
the acoustic cups. It also gives
you the choice of dialing from the
keyboard or from numbers stored
in the Phone Directory (see page
17 for information on storing
numbers in the Directory.)
To connect your Krown 200 to your telephone line, plug one end of your modular telephone cord into
the telephone wall jack. Plug the other end into either jack on the back of your Memory Printer.
After changing to Direct Connect, it is necessary to press the [SPACE BAR] or [SHIFT] + [DIAL] to
connect with the telephone line.
KEYBOARD DIALING
Turn the Power Switch ON.
The Krown 200 will automatically change to and remain in Direct Connect when you have your TDD
plugged into the telephone line.
PRESS:
TDD is now ready to dial
If the TDD is not plugged into the phone line, the screen will display:
Check the phone line and press
[SHIFT] + [DIAL] again.
The number is displayed.
TDD is now dialing.
If you make a mistake dialing, you must press:
The phone line is now cleared and
you may begin dialing again.
TDD is now ready to redial.
SHIFT
+
DIAL
TYPE NUMBER OR A-Z
LINE NOT CONNECTED
5 5 5 1 2 3 4
NBR OR A-Z 5551234
RETURN
DIALING...
CTRL
+
9
DISCONNECT Y/N
Y
DISCONNECTED
SHIFT
+
DIAL
TYPE NUMBER OR A-Z
III
13
DIRECT CONNECT WITH THE KROWN 200