Filter
Top Products
7
Konftel 200/NI • User Guide
Press Menu.
Settings
Network set-up after power on
(default: Auto)
Select Settings menu.
Press OK.
Select Net.
Press OK.
Select either digital line connection (ISDN),
analogue line connection (POTS) or Auto
mode for automatic searching. This setting
will be saved for the next time the telephone
is powered-up.
Press OK to confirm
Connect Konftel 200/NI to the power socket
outlet. Choose Auto for automatic search.
Konftel 200/NI searches automatically for an
ISDN S
0
line.
Certain ISDN S
0
lines will not be found auto-
matically by the telephone, even though it is
connected to such a line. If this happens, the
line must be chosen manually; see below.
If not connected to a digital line, please use
the Up/Down key to select ISDN (digital) or
POTS (analogue). This setting will not be
saved for the next time the telephone is
powered-up.
Isdn
Pots
Press OK to confirm.
Manual network selection (default: Auto)
Net
Isdn
Pots
Auto
English