Filter
Top Products
11
ADJUSTING THE SPEAKER VOLUME
Adjust the speaker volume using the buttons and .
Adjusting the speaker volume when two lines are connected
If you have selected double lines, you can adjust the volume level for each line. This is
useful if the lines have different volume levels.
Press the button or the button to display the current volume setting.
The current main volume appears on the display screen. Above it are two smaller volume
indicators which can be used to adjust the two connection lines.
Increase or decrease the speaker volume for both lines in the normal way, using the
and buttons.
Use the arrow buttons to mark either of the connected lines.
Select a line and adjust its speaker volume using the and buttons.
PLACING CALLS ON TEMPORARY HOLD
Mute
Press (Mute) to turn off the microphone.
The LEDs change from blue to red. The other party cannot hear what you are saying.
Press (Mute) to reconnect the call.
Hold
Press HOLD to put the call on hold.
The LEDs change from blue to ashing red. Both the microphone and the speaker are turned off
and the call is on hold.
Press HOLD to reconnect the call.
ENDING CALLS
End the call by pressing .
DURING A CALL