Filter
Top Products
8
PROGRAMMABLE FUNCTIONS
The , , , , S, A, <B, C>, and keys can be programmed with the
functions listed below:
• 2-tone Encode
Press to enter 2-tone Encode Select mode. Refer to page 19 for details.
• AUX
Press to activate the auxiliary port. Press again to deactivate the auxiliary
port. (The auxiliary port is used with optional boards.) While the auxiliary port
is activated, the icon appears on the display.
• Call 1
Press to transmit the programmed FleetSync Status message, DTMF code, or
2-tone code.
• Call 2
Press to transmit the programmed FleetSync Status message, DTMF code, or
2-tone code.
• Channel Down
Press to decrease the channel number.
• Channel Up
Press to increase the channel number.
• Direct Zone Channel
1
Press and hold for 3 seconds to store the currently selected zone and
channel as the Direct Zone Channel. Press at any time to immediately jump
to the transceiver’s Direct Zone Channel. (The default Direct Zone Channel is
the lowest channel of the lowest zone.)
• Display Character
Press to toggle the display between the zone number/ channel number and
the channel name. If no channel name has been programmed for the
selected channel, the zone number/ channel number will be displayed.
• Emergency
2
Press and hold to enter Emergency mode. Refer to page 22 for details.
• Horn Alert
Press to toggle the Horn Alert function ON and OFF. Refer to page 23 for
details.
• Key Lock
Press to lock or unlock the transceiver keys. Refer to page 25 for details.
• LCD Brightness
Press to toggle the display brightness between high and low. The default
setting is high.
• Monitor
Press to turn the transceiver signaling OFF. Press again to return to normal
operation. Refer to page 24 for details.