Filter
Top Products
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options Specifications
M
odel TK-7102H TK-8102H
GENERAL
Frequency Range
Type 1 146-174 MHz 450-490 MHz
T
ype 2 136-162 MHz 485-512 MHz
Type 3 - 400-430 MHz
N
umber of Channels 8 (4 Channels x 2 Groups)
C
hannel Spacing
Wide 25 kHz
N
arrow 12.5 kHz
Channel Step 2.5 kHz / 5 kHz 5 kHz / 6.25 kHz
6
.25 kHz / 7.5 kHz
O
perating Voltage 13.6V DC±15%
Current Drain
S
tandby 0.4 A
Receive 1.0 A
Transmit (High Power) 14.0 A
O
perating Temperature Range -30°C ~ +60°C
Frequency Stability ±2.5ppm
(
-30°C ~ +60°C)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 28 MHz 40 MHz
T
ype 2 26 MHz 27 MHz
Type 3 - 30 MHz
Dimensions (W x H x D)
6
.29” x 1.69” x 5.39”
(160 mm x 43 mm x 137 mm)
w
eight (net)
(body only, approx.) 2.6 lbs (1.18 kg)
F
CC ID
Type 1 ALH32933210 ALH32943210
Type 2 ALH32933220 ALH32943220
Type 3 - ALH32943230
R
ECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide
0
.28 µV
N
arrow
0.35 µV
Selectivity
Wide
75 dB
Narrow 60 dB
Intermodulation Distortion
Wide
70 dB
Narrow 60 dB
Spurious Response 75 dB
Audio Output (4W at 4 Ω) with less than 5% distortion)
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
50 W 45 W
Spurious Response 70 dB
(High Power)
Modulation
Wide
16KØF3E
Narrow 11KØF3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 3%
Microphone Impedance 600 Ω
■ KMC-30
M
icrophone
(supplied microphone
■
KMC-32
1
6-Key Keypad
Microphone
■ KES-3
E
xternal Speaker
■ KLF-2
Line Noise Filter
■ KPS-15
DC Power Supply
■ KMB-10
Key Lock Adapter
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Humidity 507.1/Procedure II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
ADS#07709 Printed in USA
JQA-QMA1205
JQA-QMA1205
footnotes from front:
1
DTMF includes PTT ID, Emergency ANI, Manual Encode
(KMC-32), Auto-Dial (9 numbers) & Stun.
2
Special Alert Tone Patterns operate for DTMF, selective call decode.
3
KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
4
KCT-39 & KCT-18 ignition sense cable options required.
5
KCT-39 required: Horn Alert operates for DTMF selective
call decode.
6
KPG-70D program software required: Windows
®
2000Me/XP.
Kenwood reserves the right to change specifications and features without prior notice.
Windows is a registered trademark of Microsoft Corporation in the US and other countries.
FleetSync
®
is a registered trademark of Kenwood Corporation.