Filter
Top Products
ADS#43907 Printed in USA
JQA-QMA1205
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options Specifications
Model TK-6110
GENERAL
Frequency Range
Type 1 29.7-37.0 MHz
Type 2 35.0-50.0 MHz
Number of Channels 32
Channel Spacing
20 kHz / 25 kHz
Channel Step 5 kHz
Operating Voltage 13.6 V DC ±15%
Current Drain
Standby < 0.6 A
Receive < 2.4 A
Transmit < 15 A
Duty Cycle Transmit: 20%
Operating Temperature Range -22˚f ~ +140˚f (-30˚c ~ +60˚c)
Frequency Stability
(-22˚ F - +140˚ F) ±0.0005%
Antenna Impedance 50
Ω
Dimensions (W x H x D) 6-1/4 x 2 x 6-1/4 in.
Projections not included (160 x 50 x 160 mm)
Weight (net) 3.5 lbs. (1.6kg)
FCC ID
Type 1 ALH29351110
Type 2 ALH29351120
IC Certification
Type 1
Type 2 282195666A
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity
(12dB SINAD) 0.25µV
Selectivity 75 dB
Intermodulation Distortion 70 dB
Spurious Response 70 dB
Audio Output 10W at less than 5% distortion
Band Spread
Type 1 7.3 MHz
Type 2 15.0 MHz
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Output Power 70 W
Type of Emission 16K0F3E
Spurious Response 62 dB
FM Hum & Noise 50 dB
Microphone Impedance 600
Ω
Audio Distortion Less than 3%
Band Spread
Type 1 7.3 MHz
Type 2 15.0 MHz
■ KMC-9C
Control Station
Desktop Microphone
■ KMC-27A
Microphone
(supplied microphone)
■ KMC-27B
Microphone
(MIL-SPEC noise-canceling)
■ KMC-28A
Keypad Microphone
(MIL-SPEC noise-canceling)
■ KCT-18
Ignition Sense Cable
■ KLF-2
Line Noise Filter
■ KES-5
External Speaker
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.
Unavailable Frequencies:
TK-6110K (29.7 - 37.0 MHz model): 33.60 MHz
TK-6110K2 (35.0 - 50.0 MHz model): 42.00 MHz
Standard MIL 810C MIL 810D MIL 810E
Methods/Procedures Methods/Procedures Methods/Procedures
Dust
510.1/Procedure I 510.2/Procedure I 510.3/Procedure I
Vibration
514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I
Shock
516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV
Applicable MIL-STD