Filter
Top Products
ADS#07809 Printed in USA
All accessories and options may not be available in all markets.
C
ontact an authorized Kenwood dealer for details and complete list of all accessories and options.
JQA-QMA1205
T
K-2212LK TK-3212LK
G
ENERAL
F
requency Range
Type 1 136-174 MHz 450-490 MHz
T
ype 2 - 470-512 MHz
Number of Channels
Zone/Channel Max. 128 per Radio / Max. 128 per Zone
Channel Spacing
Wide/Narrow 25, 30 kHz/12.5,15 kHz 25 kHz/12.5 kHz
Battery Voltage 7.5V DC±20%
Battery Life (5-5-90 duty cycle, during hi-power, battery saver off)
with KNB-45L (2,000mAh) Approx. 12 hours
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability ±2.5ppm (-22°F ~ +140°F)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38 MHz 40 MHz
Type 2 - 42 MHz
Dimensions (W x H x D), Projections not Included
Radio Only 2.13” x 4.8” x 1.19” (54 x 122 x 30.1 mm)
with KNB-45L 2.13” x 4.8” x 1.65” (54 x 122 x 42 mm)
Weight (net)
Radio Only 6.3 oz (180 g)
with KNB-45L 10.6 oz (300 g)
FCC ID
Type 1 ALH37683110 ALH37693110
Type 2 - ALH37693120
IC Certification
Type 1 282D-37683110 282D-37693110
TK-2212LK TK-3212LK
R
ECEIVER
(
Measurements made per TIA/EIA-603)
S
ensitivity (12dB SINAD)
Wide 0.25 µV
N
arrow 0.28 µV
Selectivity
W
ide 70 dB
Narrow 60 dB
Intermodulation Distortion
W
ide 65 dB
Narrow 60 dB
Spurious Response 65 dB 60 dB
Audio Output (8 Ω impedance) 500 mW with less than 10% distortion
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
High 5 W 4 W
Low 1 W 1 W
Spurious Response 65 dB
Type of Emission
Wide 16KØF3E
Narrow 11KØF3E
FM HUM & Noise
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 5%
Kenwood reserves the right to change specifications and features without prior notice.
FleetSync
®
is not compatible with FleetSync II offered in some Kenwood products.
FleetSync
®
is a registered trademark of Kenwood Corporation in the United States and/or other countries.
All other trademarks are property of their respective owners.
Options
Specifications
JQA-QMA1205
■ KNB-45L
Li-Ion Battery Pack
(2000 mAh)
■ KSC-35K
F
ast Charger (3-Hour)
■ KRA-16
VHF Stubby Antenna
■ KRA-17
U
HF Stubby Antenna
■ KRA-22
VHF Low Profile
Helical Antenna
■ KRA-23
UHF Low Profile
Helical Antenna
■ KRA-26
V
HF Helical Antenna
■ KRA-27
UHF Whip Antenna
■ KMC-45
Speaker Microphone
■ KMC-21
C
ompact Speaker
M
icrophone
■ KEP-2
Earphone Kit
(2.5mm plug)
■ KHS-7
Single-Muff Headset
■ KHS-7A
Single-Muff Headset
with In-line PTT
■ KHS-8BL/BE
2
-wire Palm Mic with
E
arphone (Black/Beige)
■ KHS-9BL/BE
3
-wire Lapel Mic
w
ith Earphone (Black/Beige)
■ KHS-22
B
ehind-the-head
H
eadset with PTT
■ KHS-23
2-wire Palm Mic
■ KHS-25
D
-Ring Ear Hanger
with PTT & Boom Mic
■ KHS-26
Earbud In-line
PTT Headset
■ KHS-27
D-Ring In-line
PTT Headset
■
KMB-25
Six Unit Charger
Adapter
■ KMB-28
S
ix Unit Charger
A
dapter for six
K
SC-35K chargers
■ KBH-10
Belt Clip
■ KWR-1
Water Resistance Bag
(chargers not included)
(chargers not included)
Footnotes from front:
1
Conventional Zones: 128 Channels /128 Zones max. per
radio; 128 CH max. per Zone.
2
Operator Selectable Tone (40 QT.DQT code pairs).
3
DTMF Encode: PTT ID, Emergency ANI, Auto-Dial
(16 numbers); ,DTMF Decode: Code Squelch (3-10 digit),
Selective Call (9-digit with status) Group Codes A,B, C, D,
# & *) and radio Stun.
4
Special Alert Tone Patterns operate for DTMF, FleetSync
®
selective call decode.
5
Call Key 1 & 2: operates for DTMF and FleetSync
®
status encode.
6
KPG-100D required: Windows
®
98/ NT/ 2000/ Me/XP
compatible; English/Spanish screen languages.
7
ID List capacity is 100 ID's; Short Text Message is LCD
displayed; Status Message List capacity is 50.
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55
*To meet MIL 810 and IP grade, the 2-pin connector cover has to be connected.
Applicable MIL-STD & IP