Filter
Top Products
25
ADD TO SCAN/ DELETE FROM SCAN
Press the key programmed as Scan Delete/Add, to add or
remove each channel/ group ID to or from the scan sequence.
• The channel/ group ID add indicator ( ) will appear on
the display when the selected channel/ group ID is added to the
scan sequence.
Press and hold the key programmed as Scan Delete/Add, to
add or remove each zone to or from the scan sequence.
• The zone add indicator ( ) will appear on the display
when the selected zone is added to the scan sequence.
PRIORITY SCAN
The Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
• The indicator appears on the display when the selected
channel is the Priority channel.
Note: Priority cannot be programmed onto the group ID of a
Trunking zone; it can be used only on channels of Conventional
zones.
GROUP SCAN (TK-3173 ONLY)
Group Scan is useful when more than one group ID is
programmed in a zone. Group Scan is set by your dealer on
request. It scans the revert groups as well as groups that are
allowed to be scanned.
When a call is received, the group indicator shows the group
ID, and that group becomes the revert group. Simply press
the PTT switch to respond to the call.