Filter
Top Products
12/30/20039:53 AM Page6
OPERATION
MAKING CALLS
1. Select the desired dialing mode with the Tone/Pulse selector. (Do this only once.)
2. Pick up the handset and listen for a dial tone.
3. Dial your call.
RECEIVING CALLS
When the phone rings:
1. Lift the receiver and speak into the mouthpiece.
2. Hang up the receiver to release the telephone line when the conversation is
completed.
USING THE SPEAKERPHONE
Press the
SPEAKER
button. The I
N
U
SE
indicator will light. This indicates that the unit is
ready for use as a speakerphone without picking up the receiver or handset. You can
talk to the caller via the “MICROPHONE” and hear from the “SPEAKER”. The sound
level can be adjusted by sliding the volume control.
HANDS FREE ANSWERING
You can use the speakerphone when you cannot or do not wish to pick up the phone
receiver. As a courtesy, be sure to inform the other party that you are using the
speakerphone.
1. Press the SPEAKERPHONE button. The I
N
-U
SE
I
NDICATOR
will light up.
2. Begin to speak.
IN USE INDICATOR
This LED will light when you lift the receiver – showing you the phone is connected. This
will also serve to remind you if the receiver is off the hook or not properly seated in the
base.
When the phone rings, the LED light will flash until you lift the receiver.
LAST NUMBER REDIALING
The last number you called can be redialed automatically. This is useful especially if the
number you are calling is busy.
1. Pick up the receiver or press the
SPEAKERPHONE
button to get a new dial tone.
2. Press the
REDIAL
button.
If you have any difficulty getting a dial tone, do the following:
• Press the Hook Switch or hang up the phone for 2 seconds
–Or-
• Press “F
LASH
”. Then press the R
EDIAL
B
UTTON
.
This phone will remember the last number dialed even overnight. If you do not want the
number to reside in the phone memory, pick up the phone receiver and press any