Filter
Top Products
Vintage Design Telephone with Caller ID V10M10_IM_EN_01282008
www.jWIN.com
- 8 -
OPERATIONAL INSTRUCTIONS
Basic Setup
Note: Please be sure the telephone lines are connected well and batteries or AC
adapter are installed before starting setting. Press the SET/BACK button to enter the
setting menu, use ▲UP or ▼DOWN buttons to
select from the menu including Set
Language, Set Local Area Code, Set Time/Date and LCD Contrast. Press the
FLASH button to exit the setting manual.
A. SET LANGUAGE
- When the LCD displays “SET LANGUAGE”, press the SET/BACK button
to enter.
- Use the ▲UP or ▼DOWN buttons to select the desired language (English,
French, Spanish, Turkish).
- Press the SET/BACK button to confirm.
B. LCD CONTRAST
- When the LCD displays “LCD CONTRAST”, press the SET/BACK button
to enter.
- Press the ▲UP or ▼DOWN buttons to select the desired contrast level
from 1 to 4.
- Press the SET/BACK button to confirm.
C. SET DATE/TIME
- When the LCD displays “SET DATE/TIME”, press the SET/BACK button
to enter.
- Press the ▲UP or ▼DOWN buttons to set the present year.
- Press the SET/BACK button to confirm the year.
- Use the same method to set month ,day, hour and minute
D. SET LOCAL AREA CODE
- When the LCD displays “LOCAL AREA CODE”, press the SET/BACK
button to enter.
- Press the ▲UP or ▼DOWN buttons to select the first digit of area code.
- Press the SET/BACK button to confirm the first digit.
- Use the same method to set the rest of the digits
E. SET LONG DISTANCE CODE
- When the LCD displays “LONG PREFIX”, press the SET/BACK button to
enter
- Press ▲UP or ▼DOWN
to select the code
- Press the SET/BACK button to confirm the code
F. SET IP NUMBER (SSN=SPECIAL SERVICE NUMBER)
Note: The Special Service Number (SSN) is a sequence of digits that can be
stored in your telephone and used to gain access to certain features of a
telephone network prior to dialing an actual phone number. Unless you are
completely familiar with the use of an SSN sequence, it is best to skip this
feature.
- When the LCD displays “SET SSN”, press the SET/BACK button to enter
- Press ▲UP or ▼DOWN to select the first digit
- Press the SET/BACK button to confirm the first digit
- Use the same method to set the rest of the digits