Filter
Top Products
VIDEO PLAYBACK
24 EN
MasterPage: Left
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(੬ pg. 25)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
● Pauses the tape (੬ pg. 25)
Up Button (੬ pg. 26)
C SLOW Rewind Button (੬ pg. 25)
D REW Button
● Rewind/Reverse Shuttle Search on a tape
(੬ pg. 22)
Left Button (੬ pg. 26)
E INSERT Button (੬ pg. 44)
F SHIFT Button (੬ pg. 26)
G DISPLAY Button (੬ pg. 23, 40)
H SLOW Forward Button (੬ pg. 25)
I PLAY Button
● Starts Playback of a tape (੬ pg. 22)
J FF Button
● Forward/Forward Shuttle Search on a tape
(੬ pg. 22)
Right Button (੬ pg. 26)
K A. DUB Button (੬ pg. 43)
L STOP Button
● Stops the tape (੬ pg. 22)
Down Button (੬ pg. 26)
M EFFECT Button (੬ pg. 26)
N EFFECT ON/OFF Button (੬ pg. 26)
Playback Using The Remote
Control
1
1
2
3
3
Lock tab
Remote sensor
GR-DF428AH.book Page 24 Friday, March 18, 2005 5:07 PM