Jabra JX20 Pura Bluetooth Headset User Manual


 
5
enGlish
JABRA JX20 PURA
Charging your headset from your deskstand:
What you see What this means
LED o No device in deskstand
1st. LED solid Device in deskstand
1st. LED solid, 2nd. LED pulsing
0-25% charged
1+2 LED solid, 3rd. LED pulsing
25-50% charged
1+2+3 LED solid, 4th. LED pulsing
50-75% charged
1+2+3 +4 LED solid, 5th. LED pulsing 75-100% charged
All LED´s solid Fully charged
Check Battery status:
When you are not in a call, tap either volume button.The LED
will ash in accordance with the AC adapter/USB charger
sequence above.
turninG your headset on and off
Gently turn the earpiece 90° clockwise to turn on the headset
(see g. 1).
Gently turn the earpiece 90° anti-clockwise to turn o the
headset (see g. 1).
PairinG it With your Phone
The rst time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode. In this case skip directly to point 2 below.
When pairing with a second device, or if you need to pair
manually, start with point 1 below.
1. Put the headset in pairing mode:
Turn the headset on.
Press and hold the answer / end button until the LED on the
back shines continuously.