Filter
Top Products
10
english
JABRA HALO2
I cannot hear music in the headset
- Ensure that the headset is connected to your Bluetooth
enabled device.
- You may have been out-of-range (10 meters) to your Bluetooth
enabled device or the headset might have experienced an ESD
(Electrostatic discharge) incidence. Press the Multi Function
Button to re-establish the Bluetooth audio link.
- Increase the volume on your device.
- Make sure that the Jabra HALO2 is charged.
The music I hear sounds very poor
Make sure the other device supports Bluetooth 1.1 or higher
including the Advanced Audio Distribution Prole (A2DP) for
music streaming.
If the above procedure did not help then it is possible that your
phone is using the stereo audio connection in a dierent way. You
can enable this mode on Jabra HALO2 by performing pairing in
the following way:
- Remove the Bluetooth connection to Jabra HALO2 on your
phone
- Make sure the headset is on (un-folded)
- Press and hold the answer / end button for more than 5 seconds
until the both Display icons are solid Blue and solid Orange
- Go through the regular steps in pairing the headset to
a Bluetooth device.
Be aware that standby time of the Jabra HALO2 can be lower
when using this pairing.
takInG Care of your headset
- Always store the Jabra HALO2 with the power o and safely
protected
- Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may aect operation. High temperatures may
also degrade performance.
- Do not expose the Jabra HALO2 to rain or other liquids.