Filter
Top Products
4
JABRA SPORT
GETTING STARTED
Follow these three steps before using your headset:
1 Charge your headset (approximately 2 hours)
2 Activate Bluetooth® on your mobile phone (refer to the manual
for your mobile phone)
3 Pair your headset to your mobile phone
CHARGING YOUR JABRA SPORT
Make sure that your Jabra SPORT is fully charged before you start
using it for the rst time. While charging, the battery indicator
light is ashing green and when fully charged the LED indicator is
solid green. Charging time is approximately 2 hours.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. Jabra therefore
recommends that you recharge your device at least once a month.
TURNING YOUR JABRA SPORT ON AND OFF
To turn your Jabra SPORT on press the On/O button (A) until the
LED ashes Blue. To turn your Jabra SPORT o press the On/O
button until the LED ashes Blue.
PAIRING YOUR JABRA SPORT TO A PHONE OR
OTHER DEVICE
Headsets are connected to phones or other Bluetooth devices
using a procedure called ‘pairing’. By following a few simple steps,
pairing can be done in a matter of seconds.
1. Put the headset in pairing mode
1.1a: First time pairing:
Turn on your Jabra SPORT and it will automatically enter pairing
mode and is ready to pair.
1.1b: Later pairing:
1.2 Make sure the Jabra SPORT is o. Put the SPORT into pairing
mode – press and hold the Answer/End button (A) until the
indicator light ashes blue (the rst time you turn on the
Jabra SPORT it will be in pairing mode).
1.3 Search for Bluetooth devices on your phone* or other device
and select the Jabra SPORT.