Jabra BT2090 Bluetooth Headset User Manual


 
8
ENGLISH
JABRA BT2090
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset.
- Ensure that the headset is paired to the device that you wish to use.
- Make sure your phone is connected to the headset by tapping
the Answer/End button. See the Jabra StatusDisplay™.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone.
Follow the pairing instructions.
I want to reset the headset
It is possible to reset and test the headset by ’Press and hold’ the
volume down and answer/end buttons at the same time. In the
StatusDisplay
TM
the battery icon and B
simultaneously. In this mode, the pairing list is reset, and you can
test if the headset works as you will be able to hear audio in the
speaker from the microphone.
T
. 10 seconds.
The next time you power on, the headset will go into pairing
BT2090 on.
Will the Jabra BT2090 work with other Bluetooth equipment?
- The Jabra BT2090 is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
.
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
.
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.