Filter
Top Products
6
ENGLISH
JABRA SUPREME
Pair new
device
PAIRING IT WITH YOUR PHONE/DEVICE
Bluetooth® Headsets are connected to mobile phones/devices
using a procedure called ‘pairing’. By following a few simple steps, a
phone/device can be paired with a headset in a matter of seconds.
1 Activate Bluetooth® on your phone/device
2 Turn the Jabra SUPREME on
3 The rst time you turn the Jabra SUPREME on it will
automatically enter into pairing mode. The connectivity icon
on the Status Display will ash with a blue light and you will be
voice guided through the pairing process.
If you have disabled the Voice guidance go to the Bluetooth
settings menu on your phone/device and search for new
Bluetooth devices. Choose Jabra SUPREME. When pairing is
complete Status Display will shft from ashing to steady light.
You are now ready to start using your Jabra SUPREME.
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
PAIR A NEW OR SECOND DEVICE
1 Ensure that the Jabra SUPREME is turned on
2 Tap the Voice button. You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
rst device afterwards