Insignia NS-HTMC01-BL Telephone User Manual


  Open as PDF
of 2
 
V1 ENGLISH 14-0615
USING YOUR PORTABLE CERAMIC
HEATER
1 Push the ON/OFF button to turn on your heater. The heater,
fan, and Power indicator light turn on.
2 Push the ON/OFF button again to turn o your heater.
Note: To test the tip over protection, pick up your heater while it's
operating. Your heater and the power indicator light should both
turn o. Put your heater down. The heater and the power indicator
light should both turn on.
CLEANING YOUR PORTABLE WIRE
HEATER
Important: Unplug the heater before you attempt to clean it.
• Clean your heater with a soft cloth, moistened with water.
Do not use chemical cleaners. Allow to dry thoroughly
before using.
TROUBLESHOOTING
• If the heater isn’t working, make sure that it’s plugged in
and that the power outlet is providing power.
• Make sure that the power cord is in good condition. If the
cord is cut or frayed, do not use the heater until you have it
repaired.
SPECIFICATIONS
ONE-YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Description
Model No.
Voltage/Frequency
Power
Noise (dB)
Product size
Product weight
Desktop ceramic heater
NS-HTMC01-B
NS-HTMC01-BL
NS-HTMC01-R
120V~60Hz
600W
≤50dB (1m distance)
7.28 × 4.72 × 3.74 in.
(185 × 120 × 95 mm)
1.43 lbs (0.65kg)
 previous