Filter
Top Products
mode=code
Simple change the user.ini line to read:
[3]
name=user%M.ini
mode=code
This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for
each phone configured. ‘000000000000’ will represent the MAC address of each specific
unit.
Changing the Configuration:
• Prior to making any changes, the Administrator’s Guide and the Web Manual should be
consulted.
• Changes can be made via the web interface or the .ini file can be modified and re-
downloaded to the IP5000, noting the issues above regarding environments with multiple
units.
• Examples of the more significant portions of the web interface. This is not a
comprehensive web interface tutorial but intended to ensure that all settings required for
compatibility with xIC are selected. If a particular section is not shown here, then the
defaults were used:
Time
• Enable NTP On Off
• Date Format
Sun DD Jan,YY
• Time Format
24 hours
hours
• Time Zone
GMT-05:00
• Enable Daylight Saving Time On Off (DST)
• DST Start Month
4
• DST Start Day
2
• DST Start Hour
2
• DST Start Min
0
• DST End Month
10
• DST End Day
29
• DST End Hour
2
• DST End Min
0
• NTP Refresh Interval (60~3153600)
7200
• NTP Server1
172
.
16
.
1
.
2
• NTP Server2
192
.
43
.
244
.
18