Filter
Top Products
HandyTone-496 User Manual Grandstream Networks, Inc.
25
Send Flash Event:
No Yes (Flash will be sent as a DTMF event if set to Yes)
Enable Call Features:
No Yes (if Yes, Call Forwarding & Call-Waiting-Disable are supported locally)
Use Bell-style
3-way Conference:
No Yes (if Yes, *23 will be disabled)
Offhook Auto-Dial:
(User ID/extension to dial automatically when offhook)
Proxy-Require:
Disable Call-Waiting:
No Yes
NAT Traversal (STUN):
No Yes
No Key Entry Timeout:
4
(in seconds, default is 4 seconds)
Preferred Vocoder:
(in listed order)
choice 1:
current setting is " PCMU"
choice 2:
current setting is " PCMA"
choice 3:
current setting is " G723"
choice 4:
current setting is " G729"
choice 5:
current setting is " G726-32"
choice 6:
current setting is " iLBC"
Voice Frames per TX:
2
(up to 10/20/32/64 for G711/G726/G723/other codecs respectively)
G723 rate:
6.3kbps encoding rate 5.3kbps encoding rate
iLBC frame size:
20ms 30ms
iLBC payload type:
97
(between 96 and 127, default is 97)
Silence Suppression:
No Yes
F
ax Mode:
T.38 (Auto Detect) Pass-Through
Early Dial:
No Yes (use "Yes" only if proxy supports 484 response)
Dial Plan Prefix:
(this prefix string is added to each dialed number)
Use # as Dial
K
ey:
No Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
SUBSCRIBE for MWI:
No, do not send SUBSCRIBE for Audible Ringing Indication
Yes, send periodical SUBSCRIBE for Audible Ringing Indication
Send Anonymous:
No Yes (caller ID will be blocked if set to Yes)
Lock keypad update:
No Yes (configuration update via keypad is disabled if set to Yes)