Filter
Top Products
Grandstream Networks, Inc. GXP User Manual Page 30 of 38
Firmware 1.1.6.44 Last Updated: 12/2008
Idle Screen XML
Download
Enable XML Idle Screen download via TFTP or HTTP. Define XML server path.
XML
Application
Enter server path for XML application. This option applies to GXP-2020 only.
Offhook Auto
Dial
To configure a User ID/extension to dial autpomatically when the phone is taken offhook.
DTMF Payload
Type
This parameter sets the payload type for DTMF using RFC2833. Default is 101.
Onhook
Threshhold
It determines the time handset has to be down to be recognized it’s onhook. Default is
800ms. For GXP280 only.
Syslog Server
The IP address or URL of System log server. This feature is especially useful for ITSPs.
Syslog Level
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
INFO, WARNING or ERROR. Syslog messages are sent based on the following events:
• product model/version on boot up (INFO level)
• NAT related info (INFO level)
• sent or received SIP message (DEBUG level)
• SIP message summary (INFO level)
• inbound and outbound calls (INFO level)
• registration status change (INFO level)
• negotiated codec (INFO level)
• Ethernet link up (INFO level)
• SLIC chip exception (WARNING and ERROR levels)
• memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components: GS_LOG: [device MAC address][error code] error message
For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000].
Ethernet link is up.
NTP server
This parameter defines the URI or IP address of the NTP (Network Time Protocol) serve.
It is used to display the current date/time.
Distinctive Ring
Tone
Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a particular
Caller ID. The GXP will ONLY use selected ring tones for particular Caller IDs. For all
other calls, the GXP will use System Ring Tone. When selected and no Caller ID is
configured, the selected ring tone will be used for all incoming calls.
System Ring
Tone
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on local telecom standard.