Filter
Top Products
Using The Hold Feature (on Handset)
The “Hold” key is used to place a caller on
hold. To use, simply press the “Hold” key on
the handset. The LED light on the handset
will indicate that the line is on hold and the
base unit LED will blink rapidly Green.
When placing a caller on hold, the line will
not be disconnected. To return to the caller,
press the “ON/OFF” key on the handset or
the “SPEAKER” key on the base
.
Note: Pressing the SPEAKER key on the base when the
handset is on hold will activate the base unit. The hand-
set will stay on hold until released.
Using The Mute Feature
A “Mute” key is provided to allow for
privacy during a background conversation.
When the “Mute” key is activated, the
microphone in the speakerphone within
the base becomes disabled. When the
“Mute” feature is activated, the caller will
not hear your voice. The “Mute” key will
illuminate to show that the feature is acti-
vated.
To de-activate, press the “Mute” key again.
The MUTE feature only works on the base unit. The
handset does not mute out when MUTE is active.
31