Filter
Top Products
SETTING UP
CLOCK TIME SETTING
The correct time should be setas follows:
- Press and hold down Time button.
- Whilst holding down the Time button, press Hourand then Minute
buttons as necessary to display thecorrect time.
Note: that the clock is a 12 hour clock; in the case of PM, an indicator will
show to the top left of the clock display.
RINGER SETTING
A switch (Ringer) located on the rearof the base unit allows the ringer to
be switched On or Off.
If you donot wish the telephone to ring,set the switch to the Off position. The
ringer lamp will still flash on receipt of a call.
Outgoing calls can still be made when the switch is setto the Off position.
DIMMER SETTING
A switch (Dimmer) located on the leftside of the base unit allows to adjust
(Hi or Lo) the brightness of thedisplay.