Filter
Top Products
ALARM OPERATION
1 - SETTING THE ALARM MODE
Choose wich alarm mode you want to by moving the alarm mode switch
to one of the following position:
0 : no alarm
: both strobe flasher and sound alarm actived
: both strobe flasher and shaker (if connected) actived
: both sound alarm and shaker (if connected) actived
2 - VOLUME CONTROL SLIDE SWITCH
Set the volume of the alarm sound.
3 - TONE CONTROL SWITCH (3 POSITIONS)
Set the tone of the alarm sound.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc guarantee it for the
period of one year. During this time, all repairs or replacements (at our option) are free
of charge.Should you experience a problem then contact our helpline or visit our
website at www.geemarc.com.The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered with or taken apart by
anyone who is not an authorised Geemarc representative.The Geemarc guarantee in
no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED
AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM
Please note: The guarantee applies to the United Kingdom only.
Declaration : Hereby Geemarc Telecom SA declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio and
Telecommunications Terminal Equipment Directive 1999/5/EEC and in particular article
3 section 1a, 1b and section 3.
For product support and help visit our website
at www.geemarc.com
telephone 01707 384438
or fax 01707 372529