Filter
Top Products
5 - NETWORK FEATURES, FLASH TIME, DIAL PAUSE
1 - Press the
key.
2 - Press the
( )orthe ( ) key to select the desired icon shown
on the display. The selected icon will flash on the display.
3 - Press the key to select the icon.
4 - You can choose from the menu below:
1/5 1/2 : 1 For UK, 2 for France (CID features).
2/5 Tone/Pulse for dialling must be set to Tone.
3/5 A,B,C,D (Telephone network settings)
4/5 Flash time R key
5/5 Dial pause to insert a pause in the mumber
You can scroll into the menu by pressing the
key. Press the ( )or
the
( ) key to modify entries, press to confirm modification.
5 - Press the
key to exit the menu.
Network settings
You can choose between 4 network settings:
A Factory setting (default value), B, C, D
These settings are used to match the signal level when working on different
phone networks.
Note: The setting should be left to A
Flash time settings for
. You can choose between 2 settings:
a) *** 100 ms for United Kingdom
b) ****** 300 ms for France
Dial pause settings
You can insert a pause time in a phone number after the first digit, the digits after
the pause time are dialled after a 3 seconds delay. Two settings are available to
use this feature Yes or No.
15
HANDSET SETTINGS