Filter
Top Products
30
TROUBLESHOOTING TIPS
NO DIAL TONE
• Check all cabling to make sure that all connections are secure and not
damaged.
• Check hook switch: Does it fully extend when handset is lifted from cradle?
NO DISPLAY
• Replace batteries.
• Check for proper battery installation.
NO INFORMATION IS SHOWN AFTER THE PHONE RINGS
• Did you order Caller ID service from your local telephone company?
This unit requires that you subscribe to Caller ID service in order to
work.
• Be sure to wait until the second ring before answering.
ERROR MESSAGE IS DISPLAYED
•
ERROR
appears in the display if the unit detects anything other than valid
Caller ID information during the silent period after the first ring. This
message indicates either the presence of noise on the line, or that an
invalid message has been sent from the telephone company.
PHONE DOES NOT DIAL OUT
• Check the dial mode in the setup menu. Is it set to tone, which may not be
compatible with your local dialing service?