Filter
Top Products
6
INSTALLATION
Before you begin, see page 5 for
Battery Installation information.
1. Plug one end of the telephone
line cord into the jack marked
PHONE LINE on the back of the
unit, and plug the other end into
a modular wall jack.
2. Connect the handset cord into
the phone jack, on the left side of
the base unit and into the
handset.
3. Set the PULSE/TONE switch
(located on the handset) to TONE
if you have touch-tone service,
or to PULSE if you have rotary
dial service.
0
OPER
#
FLASH STORE MEM DIAL REDIAL
PULSE TONEHI LO OFF
1
2
3