6. Place the handsets in the charge cradles.
The blue CHARGE indicator turns on,
verifying the batteries are charging.
For accessory handsets (without Base unit),
an auto-registration mechanism is available
so the unregistered accessory handset can be
automatically registered without the need of
entering a PIN code.
1. Put the base into subscription mode, by
pressing and holding the PAGE button for at
least 8 seconds.
2. The DECT indicator light starts ashing. It
is now ready to be associated with a new
handset. This registration mode lasts 90
seconds after pressing the button. Once the
subscription is done, the base LED ashing
is switched off.
1. Make sure your phone is (not in talk
mode).
2. Press , navigate to the Registration
menu, press
to enter.
3. Use or to scroll to Register Handset.
: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
: A handset can be
registered to only one
base.
: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
: A handset can be
registered to only one
base.