GE 28213 Series Conference Phone User Manual


  Open as PDF
of 48
 



1. Press the  (5 or 6) button to scroll to the  sub-menu.
. Press the
 button to enter the menu. The screen displays 4YES
NO. The default setting is NO.
. Use the
 (5 or 6) button to move the cursor to  or .



. Press the
 button to save your selection. You will hear a
conrmation tone.

As you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.

1. Press the (5 or 6) button to scroll to the 
sub-menu.
. Press the
 button to enter the menu. The screen displays YES4NO.
The default setting is NO.
. Use the
 (5 or 6) button to move the cursor to  or .


. Press the  button to save your selection. You will hear a
conrmation tone.



The charge/in use indicator on the base will ash to alert you to an incoming call,
during paging, or if you have a message waiting from your service provider. The
indicator will remain lit when a handset is in the base charging or when the line is in
use.
 previous next