Filter
Top Products
13
To avoid power outage, you can install (four) AAA batteries (not included in sales) into the
base as the backup.
1. Remove the battery compartment cover (located on the bottom of the base).
. Follow the battery installation display and insert (four) AAA batteries inside the
compartment.
3. Put the battery compartment cover back into place.
1. Choose an area near an electrical outlet and a telephone wall jack (either two RJ11
or one RJ14 type), and place your cordless telephone on a level surface, such as a
desktop or tabletop, or you may mount
it on the wall.
. Plug the AC power converter into the
electrical outlet and the DC connector
into the jack on the back of the base.
3. Plug one end of a telephone line cord
into the TEL LINE 1 jack on the back
of the base and the other end into the
modular wall jack for Line 1. Plug the
other telephone line cord into the TEL
LINE jack on the back of the base and
the other end into modular wall jack for
Line .
4.
Place the handset in the base cradle. The charge/in use indicator turns on, verifying the
battery is charging. HANDSET 1 shows in the handset’s display after approximately
minutes.
5. Allow the phone to . If you don’t properly charge
the phone, battery performance is compromised.