Filter
Top Products
40
base, and your original call is put on hold.
• To switch between the two calls, press the DELETE/FLASH button.
NOTE: Some cellular phones do not support this feature, refer to
your cellular devices Instruction Manual.
last number redIal
You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press the TALK or SPKR button on the handset or the SPEAKER on the base, or press
the Cell (SKR) to dial the number.
2. Press the button.
-OR-
To quickly choose from any of the last ten numbers you dialed:
1. Press the button first, then use the
or
button to select the desired
redial number.
2. Press the TALK or SPKR button on the handset or the SPEAKER on the base, the
number dials automatically.
-OR-
If you get a busy signal and want to keep dialing the number, press the button to
quickly redial the number.
page
The page feature helps you locate a misplaced handset. To send and receive
pages, all handsets must be registered. If your handset is not registered, follow the
instructions in the Registration section of this manual.
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Make sure the phone is OFF (not in talk mode).
2. Press the PAGE/PUSH TO TALK button on the base.
3. All registered handsets beep for two minutes and PAGING FROM BASE shows on
each handset’s display.
4. To cancel the page, press the PAGE/PUSH TO TALK button on the base, or press
the TALK or SPKR button on each handset.