GE 28115 Series Conference Phone User Manual


 
28
6. Press the menu ok/mute button again to save your selection. The display shows ADD TEL
NUMBER.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits, including pauses),
and press the menu ok/mute button to confirm, The records are stored alphabetically in
the phone book.
Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the #PAUSE/RINGER button on the handset’s touch-tone pad to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
Edit Records
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button to access the phone book sub-menu.
3. Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS.
4. Press the menu ok/mute u button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem
button to confirm, ENTER NAME shows on the display.
6. Repeat Steps 5 through 7 in “Add Records” section.
Delete Records
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button to access the phone book sub-menu.
3. Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS.
4. Press the menu ok/mute button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the
del/intercom/conf button, DELETE? shows on the display.
6. Press the del/intercom/conf button again to confirm.
NOTE: If you don’t want to change or delete a record, simply press the end
button, or wait for one minute to exit automatically.