Filter
Top Products
26
2. Press the MEMORY button to display
SELECT MEMORY 01-50
.
3. Press the desired memory location button (01 through 50) or use the CALLER
ID-VOL (- or +) button to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear in the display. If the memory
location is empty, “EMPTY” appears in the display.
4. Press the MEMORY button. The display shows
ENTER NAME
.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the 2
key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3
times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4 times for
the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the
letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DELETE button to backspace and
erase the wrong character(s) or number(s).
6. Press the MEMORY button to confirm and save the record. The display shows
ENTER TEL NUMBR
.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses (press #PAUSE button)), and press the MEMORY button again
to save the record. The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location, return to
step 2 and repeat the process.
STORING THE LAST NUMBER DIALED
You may transfer all three redial numbers into internal user memory.
1. Make sure the phone in OFF (not in TALK mode).
2. Press REDIAL button to display the most recent redial number.
3. Use the CALLER ID-VOL (- or +) button to scroll to desired redial number.
4. Press MEMORY button to display
SELECT MEMORY 01 - 50
.
5. Use touch-tone pad to enter two digit desired memory location (01 through 50).
Display will show
ENTER NAME
.
6. Follow step 5 in the “Storing a Name and Number in Memory” section to
enter name.